Category: <b>BIOS</b>
<p>
<pre><b>INT 4D - TI Professional PC - DISK - RESET DISK SYSTEM</b>

	AH = 00h
	DL = drive (if bit 7 is set both hard disks and floppy disks reset)
Return: AH = status (see <a href=../../it/34/2.html>#00234</a> at INT 13/AH=01h)
	CF clear if successful (returned AH=00h)
	CF set on error
Note:	this function is the same as INT 13/AH=00h on a standard PC BIOS
SeeAlso: AH=01h,AH=02h,AH=08h,AH=0Bh,INT 13/AH=00h,INT 46"TI Professional"
SeeAlso: INT 48/AH=00h"TI Professional",INT 4A/AH=00h"TI"
</pre>