Category: <b>network</b>
<p>
<pre><b>INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - GET REAL IP ADDRESS</b>

	AH = 03h
	DS:SI -&gt; DWORD buffer for IP address
Return: CF clear if successful
	CF set on error
	    AL = error code
Range:	INT 4C to INT FB, selected by configuration
Note:	the Beame&ampWhiteside TCP/IP protocol stack uses two consecutive
	  interrupts (62h and 63h by default); the BW-NFS client uses a third
	  consecutive interrupt (64h by default) if it is loaded
SeeAlso: AH=FEh,INT 21/AH=3Fh"BW-TCP",INT 63/AH=24h"BW-TCP"
SeeAlso: INT 64/AH=01h"BW-NFS"
</pre>