Category: <b>disk I/O enhancements</b>
<p>
<pre><b>INT 78 - TARGA.DEV - CMC International SCSI device driver - SET I/O PORT</b>

	AH = 00h
	DX = interface board I/O port
Return: CF set on error
	    AL = error code (see <a href=../../it/86/37.html>#03786</a>)
InstallCheck:	(used by TARGA.DEV) test for the string "SCSI" at offset 03h
	  into the interrupt handler
Note:	if this routine is not called, the port is the driver's default
	  (usually 0280h or 0300h)
SeeAlso: AH=01h,AH=02h
Index:	installation check;TARGA.DEV

</pre>