X-Authentication-Warning: delorie.com: mail set sender to opendos-bounces using -f X-MimeOLE: Produced By Microsoft Exchange V6.5 Content-class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Subject: RE: Tseng ET6000 programming info? Date: Mon, 13 Mar 2006 14:17:16 +1100 Message-ID: X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: Tseng ET6000 programming info? Thread-Index: AcZDaJz/kQuDDki4Sn+PShuo0QxE5gC4wxUw From: "da Silva, Joe" To: X-Brightmail-Tracker: AAAAAA== Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from quoted-printable to 8bit by delorie.com id k2D3HXuv015831 Reply-To: opendos AT delorie DOT com Greetings, Veit. Yes, the XFree86 code might have what I need, however, it is very complicated and I don't understand it. :-( Also, I can't find the relevant code in the MGL sources. Although there is a brief mention of ET6000 in one small text document, there seems no mention in the code itself. I suspect the stuff I want is not in the public sources? As for the VESA level, unfortunately it is only V2.1, so that's no help with this problem either. From the ET4000 information, I can see this stuff is very complicated and messy, with lots of bits scattered between different registers. So trying to reverse-engineer something like XFree86 to figure out what's what on the ET6000 is beyond my capabilities. There just has to be a datasheet for the ET6000 out there somewhere, if only I can find it. Joe. -----Original Message----- From: Veit Kannegieser [mailto:veit AT kannegieser DOT net] Sent: Thursday, 9 March 2006 7:56 PM To: opendos AT delorie DOT com Subject: Re: Tseng ET6000 programming info? da Silva, Joe wrote: >I've been looking around for an ET6000 data sheet Do not have any informations, but the XFree86 display driver code should tell a bit.. >refresh rate Can you use the Scitech SNAP video libraries (MGL)? If the card has VESA 3.0 support, it should also possible to set the refresh rate hardware independend. -- Veit Kannegieser This email (including any attachments) is confidential. If you are not the intended recipient, you must not disclose or use this email or the information contained herein for any purpose. If you have received this email in error, please immediately advise us by reply and delete this email. This email may not be altered, forwarded or re-issued without our consent. The Bayard Metering Group is not responsible for any changes made to this email or the effect of any changes to the meaning of this email. It is the responsibility of the recipient to scan this email for viruses and faults prior to processing. The Bayard Metering Group shall not be liable for any loss or damage caused by this email from transmission, viruses, faults or the use of data accompanying this message. The Bayard Metering Group reserves all its rights, including copyright, in this email.