X-Authentication-Warning: delorie.com: mailnull set sender to opendos-bounces using -f Message-ID: <01FD6EC775C6D4119CDF0090273F74A455A883@emwatent02.meters.com.au> From: "da Silva, Joe" To: "'opendos AT delorie DOT com'" Subject: RE: configuring sound card Date: Thu, 6 Dec 2001 21:24:03 +1100 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: text/plain Reply-To: opendos AT delorie DOT com Huh? I've never played with a WinModem, but Neil did not mention modems at all, so unless WinModems always include a sound card (dunno), I'm not sure if that's what Neil is asking about(?). Also, AFAIK, WinME *is* DOS+Windoze, although I'm told it prohibits most alterations to "CONFIG.SYS" and "AUTOEXEC.BAT". Anyway, back to the problem at hand - Firstly, perhaps a SysInfo program like AMIDIAG 6 (www.ami.com) or http://www.navsoft.cz/indexen.htm can detect what sound hardware you have? Many DOS programs support SoundBlaster sound cards and can access these directly, if an environment variable called BLASTER (IIRC) is defined, giving the port addresses, interrupt numbers, etc. So, if your sound card or hardware is "SoundBlaster compatible", you may need only to find out these parameters (hopefully the above software or other means can help) and set up this environment variable in your "AUTOEXEC.BAT". In my own case, I have a sound card, based on a Crystal chip, which is dormant at power-up. It can be software configured as "SoundBlaster compatible" or alternatively (IIRC), "Windoze sound system compatible" (some other pseudo-standard MonoSoft wanted to force everyone into, perhaps part of the WinModem rubbish). So, I run a configuration program (supplied with the card) that configures/enables it as "SB compatible" and also sets the above environment variable. Your sound card or hardware might already be "SB compatible" (or perhaps with jumper settings?). Or it might be software configurable, with or (like mine) without non-volatile memory, to retain it's configuration between power-ups. You might (?) also find some info. at "http://www.jwcs.net/dap/". Joe. > -----Original Message----- > From: Robert W Moss [SMTP:domanspc AT juno DOT com] > Sent: Thursday, December 06, 2001 6:42 PM > To: opendos AT delorie DOT com > Subject: Re: configuring sound card > > Sorry Neil, You probably have one of those great M$ screwed up things > called a WIN Modem. Needs special files from WinDoze to run it. IBM > probably won't be able to provide any patch for DOS, since they made a > deal with M$ not to do any more work on DOS after PCDOS 2000. > > WIN ME is not a DOS frienly world and you will have to write some of your > > own BASIC files to get DOS programs to work with it. Since it has no DOS > > underlayment as WIN9x has, you can not run them in a DOS window either. > > You might consider installing WIN98SE if you really need Windoze to run > the sound card. Otherwise you can get a Sound Blaster card and install > it. > > BOB ' DOMAN ' MOSS > ________________________________________________________________ > GET INTERNET ACCESS FROM JUNO! > Juno offers FREE or PREMIUM Internet access for less! > Join Juno today! For your FREE software, visit: > http://dl.www.juno.com/get/web/.