To: opendos AT delorie DOT com
Date: Wed, 5 Jul 2000 19:20:32 -0700
Subject: Re: Recognizing SCSI HDD
Message-ID: <20000705.192035.-714791.0.domanspc@juno.com>
X-Mailer: Juno 4.0.9
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
X-Juno-Line-Breaks: 0-6,8-21
X-Juno-Att: 0
X-Juno-RefParts: 0
From: Robert W Moss <domanspc AT juno DOT com>
Reply-To: opendos AT delorie DOT com

We're also talking about a WIN NT system wherein the only 
function of DOS is to boot from the floppy disk and provide 
Disk Image an opening to make an image of the NTFS 
Partitions, Let's not get lost here.

BOB 'DOMAN' MOSS  'Maybe a few chocolate chips would be good.'

On Wed, 5 Jul 2000 21:37:13 +0000 (GMT) Travis Siegel
<tsiegel AT softcon DOT com> writes:
> On Wed, 5 Jul 2000, Preston Petty wrote:
> 
> > Sounds like you have LBA enabled in cmos setup.
> > Suggest you leave off LBA/UDMA/etc..just try PIO first.
> > (you can always enable it later)
> 
> Scsi drives do not get an entry in the cmos if the bios of the scsi 
> card
> is handling the drive (as most scsi cards that support hds do) The 
> cmos
> entry is set to none for the scsi drives, and the card takes care of
> everything.  So, lba and such do not apply.
> 

________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.