Message-Id: <199806121550.KAA18269@endeavor.flash.net>
MIME-Version: 1.0
To: <fernande AT internet1 DOT net>
From: "Mark  F.  Warchol" <mwarchol AT flash DOT net>
CC: <OpenDOS AT delorie DOT com>
Date: Fri, 12 Jun 1998 11:49:36 -0600
Subject: Re: Help with drivparm?
Precedence: bulk

  Hi Chad,
    The XT does think that it is a #360 drive and the drive is the one you
sent me.  Since the drive seems to be in working order and since the
computer works when I place the old 5.25 back into the slot I am thinking
that it is a config problem.  In this older computer there is no config
screen so I must have to do something in the config file I think to get the
computer to acknowledge the drive as #720.  The drivparm line I used was the
one listed below in your reply.
    BTW, have you a source for those old Zeneth Super Sport laptops?  I've
been trying to find one hopefully #386 but will settle for less but cannot
locate any in dealers used inventories?
     Thanks for any suggestions,
        Mark

On 1998-06-12 fernande AT internet1 DOT net said:
   >>I am hoping to configure a #720 drive to work where a 360K drive
   >>was previously however have had no success with the drivparm
   >>command. My config I have included:
   >>drivparm= /D:1 "a" /C /F:2 /I
   >>This has done nothing.  I have also tried replacing the "1" with
   >>"A" and even "0 & 2".  I have also tried leaving the /I out
   >>None have done the trick?