X-Authentication-Warning: delorie.com: mail set sender to geda-user-bounces using -f X-Recipient: geda-user AT delorie DOT com Message-ID: <4FB9C7CB.8040700@innocent.com> Date: Mon, 21 May 2012 00:42:51 -0400 From: Gus Fantanas User-Agent: Mozilla/5.0 (X11; Linux i686; rv:12.0) Gecko/20120430 Thunderbird/12.0.1 MIME-Version: 1.0 To: geda-user AT delorie DOT com Subject: [geda-user] Rat Thickness and Trace Transparency in Updated PCB; Other Questions References: <4FB9B947 DOT 90404 AT comcast DOT net> <201205210344 DOT q4L3iNfC027519 AT envy DOT delorie DOT com> In-Reply-To: <201205210344.q4L3iNfC027519@envy.delorie.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Reply-To: geda-user AT delorie DOT com I recently upgraded to Ubuntu 12.04 LTS, which updated gEDA. Everything works well except a couple of minor annoyances. I may be doing something wrong. Here are my questions: 1. I tried to change the default rat thickness in PCB by including the line 'rat-thickness = 2' in the file '~/.pcb/preferences', according to the online documentation (which may be out of date?). This works as expected the first time I start PCB after that file edit, but when I quit PCB, that line seems to disappear! If I don't re-edit '~/.pcb/prefernces', next time I start PCB the rats have their default thickness. 2. In the version of PCB that came with Ubuntu 11.11, traces were not transparent if I remember correctly, so the trace of the active layer was in the foreground. Is there any way to revert to that behavior in the PCB version which came with the upgrade to Ubuntu 12.04 LTS? 3. Is there any documentation on how the 'Import Schematics' option works? 4. If the new PCB has 1nm resolution, as has been discussed on this board, I don't see it. The finest grid available as an option is only 0.01mm, just like before the upgrade to Ubuntu 12.04 LTS. Am I missing something?