Hi Valdimir,

I = can't make ChangeDrillSize work.

1. I select al= l the holes in an element I want to change

2. I go = to the terminal and key :ChangeDrillSize(SelectedPins,40,mil) <CR>

3. the curser moves to the next line

4. I select "Generate object report"

5. I check the hole size and nothing has happened

Can you help?

torben

On Mon, Mar 23, 2020 at 9:35 AM Torben Friis <friistf AT gmail DOT com> wrote:

Hi Vladimir,

That worked.

= Thank you very much.

torben

On Mon, Mar 23= , 2020 at 2:41 AM Vladimir Zhbanov (vzhbanov AT gmail DOT com) [via geda-help AT delorie DOT com] <geda-help AT delorie DOT com> = wrote:

On Sun, M= ar 22, 2020 at 12:07:19PM +0100, Torben Friis (friistf AT gmail DOT com) [via geda-help AT delorie DOT com] wrote: > Hi,
> I have run a one.sch file through "gsch2pcb -v project" and = I get the
> messages:
>
> Reading project file: project
>=C2=A0 =C2=A0 =C2=A0schematics "one.sch"
>=C2=A0 =C2=A0 =C2=A0output-name "board"
> Processing PCBLIBPATH=3D"/usr/share/pcb/pcblib-newlib:/usr/share/= pcb/newlib"
> Running command:
> gnetlist -g pcbpins -o board.cmd one.sch
> --------
> Loading schematic [/home/torben/gaf/proj2/one.sch]
>
> --------
> Running command:
> gnetlist -g PCB -o board.net one.sch
> --------
> Loading schematic [/home/torben/gaf/proj2/one.sch]
>
> --------
> Default m4-pcbdir: /usr/share/pcb/pcb/m4
> --------
> gnet-gsch2pcb-tmp.scm override file:
>=C2=A0 =C2=A0 =C2=A0(define gsch2pcb:pcb-m4-dir "/usr/share/pcb/pc= b/m4")
>=C2=A0 =C2=A0 =C2=A0(define gsch2pcb:use-m4 #t)
> Running command:
> gnetlist -g gsch2pcb -o board.pcb -m gnet-gsch2pcb-tmp.scm one.sch
> --------
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D
> gsch2pcb backend configuration:
>
>=C2=A0 =C2=A0 ----------------------------------------
>=C2=A0 =C2=A0 Variables which may be changed in gafrc:
>=C2=A0 =C2=A0 ----------------------------------------
>=C2=A0 =C2=A0 gsch2pcb:pcb-m4-command:=C2=A0 =C2=A0 "/usr/bin/m4&q= uot;
>=C2=A0 =C2=A0 gsch2pcb:pcb-m4-dir:=C2=A0 =C2=A0 =C2=A0 =C2=A0 "/us= r/share/pcb/pcb/m4"
>=C2=A0 =C2=A0 gsch2pcb:pcb-m4-path:=C2=A0 =C2=A0 =C2=A0 =C2=A0("$H= OME/.pcb" ".")
>=C2=A0 =C2=A0 gsch2pcb:m4-files:=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 &quo= t;"
>
>=C2=A0 =C2=A0 ---------------------------------------------------
>=C2=A0 =C2=A0 Variables which may be changed in the project file:
>=C2=A0 =C2=A0 ---------------------------------------------------
>=C2=A0 =C2=A0 gsch2pcb:use-m4:=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0= yes
>
>=C2=A0 =C2=A0 ----------------
>=C2=A0 =C2=A0 M4 command line:
>=C2=A0 =C2=A0 ----------------
>=C2=A0 =C2=A0 /usr/bin/m4 -d -I/usr/share/pcb/pcb/m4 -I$HOME/.pcb -I. > /usr/share/pcb/pcb/m4/common.m4=C2=A0 - >> board.pcb
>
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D
> Using the m4 processor for pcb footprints
> Loading schematic [/home/torben/gaf/proj2/one.sch]
>
> --------
> Running command:
> rm board.pcb.tmp
> --------
>
> --------
> Running command:
> rm board.pcb
> --------
>
> --------
> No elements found, so nothing to do.
>
> I am no expert, but everything in the verbose reply looks normal - exc= ept
> that there are some references to=C2=A0 m4 ("/usr/bin/m4" is= empty). The
> "one.sch" file looks normal (to me) and so does the "pr= oject" file.

Torben,

"m4" is a program which is usually installed at "/usr/bin&qu= ot; in
Linux distributions.=C2=A0 Have you installed it?=C2=A0 Or maybe it has
another location on your system? You have to install the PCB
program, too, to make something useful with gsch2pcb (or
lepton-sch2pcb).

--
=C2=A0 Vladimir

(=CE=BB)=CE=B5=CF=80=CF=84=CF=8C=CE=BD EDA =E2=80=94 https://github.com= /lepton-eda