Hi Vladimir,

I = checked the pgm gsch2pcb and was led to a file:

grep DIP14M /usr/sha= re/pcb/pcblib

where I could see that DIP14M is width 400 mil. So I s= hould use DIP14 instead.

The same file showed that hc-12 is not foun= d in it (while fx TL072 also is found).

torben AT torben-Aspire-E5-773G= :/home/gaf/myproject2$ gsch2pcb project

----------------------------= ------
Done processing.=C2=A0 Work performed:
1 file elements and 0 m= 4 elements added to board.new.pcb.

Only 1 file element? 2 file eleme= nts are shown in one.sch

I dont know if that helps.
torben

On Tue, Mar 5, 2019 at 9:24 PM Torben Friis <friistf AT gmail DOT com> wrote:

<= div class=3D"gmail_default" style=3D"font-family:arial,helvetica,sans-serif= ;font-size:large">Hi Vladimir,

Thank you for your reply.

I ha= ve changed the names as follow (for convenience):

hc-12.sym:
..
pinlabel=3DANT
T 2100 415 5 7 0 1 0 3 1
pinseq=3D6
T 2100 41= 5 5 7 0 1 0 3 1
pintype=3Dpas
}
T 2500 730 3 7 0 0 0 0 1
numslo= ts=3D0
B 200 0 1800 800 3 0 0 0 -1 -1 0 -1 -1 -1 -1 -1
T 1400 320 3 7= 0 0 0 0 1
footprint=3Dhc-12.fp

hc-12.fp:
torben AT torben-Aspire= -E5-773G:/home/gaf/myproject2$ cat /usr/share/pcb/pcblib-newlib/geda/hc-12.= fp
Element["" "hc-12" "" "" 0 0 = 0 25000 0 100 ""]
(
Pad[-6400 -40000 -3600 -40000 2800 2000= 3600 "VCC" "VCC" "square"]
Pad[-6400 -300= 00 -3600 -30000 2800 2000 3600 "GND" "GND" "square= "]
Pad[-6400 -20000 -3600 -20000 2800 2000 3600 "RXD" &qu= ot;RXD" "square"]
Pad[-6400 -10000 -3600 -10000 2800 2000= 3600 "TXD" "TXD" "square"]
Pad[-6400 0 -3= 600 0 2800 2000 3600 "SET" "SET" "square"]Pad[95859 -984 99259 -984 3600 2000 4400 "MCHFIX" "MCHFIX&q= uot; "square"]
Pad[101474 -37677 104274 -37677 2800 2000 3600 = "GND1" "GND1" "square"]
Pad[101474 -17677 = 104274 -17677 2800 2000 3600 "GND2" "GND2" "square= "]
Pad[97854 -27677 102854 -27677 5000 2000 5800 "ANT" &q= uot;ANT" "square"]
)

and I have entered:
/usr/s= hare/gEDA/sym/radio/hc-12.sym

and it does appear co= rrectly in "Select component".

and:
/usr/share/pcb/pcblib-newlib/geda/hc-12.fp
/h= ome/torben/www/user/mark_salyzyn/footprints/hc-12.fp
/home/geda/www/user= /mark_salyzyn/footprints/hc-12.fp

I thought that was identical to wh= at I had entered for picaxe. And yet hc-12 does not appear as a result of g= sch2pcb project/pcb board.pcb as picaxe does.
Can you see why?
torben=

On Mon, Mar 4, 2019 at 4:45 PM Vladimir Zhbanov (vzhbanov AT gmail DOT com) [via = geda-help AT delori= e.com] <g= eda-help AT delorie DOT com> wrote:

On Mon, Mar 04, 2019 at 03:58:49PM +0100, Torben Friis = (friistf AT gmail DOT com) [via geda-he= lp AT delorie DOT com] wrote:
> Hi Erich,
> Thank you very much for your reply.
>
> I have the following 2 files for PICAXE-14M:
>
> /usr/share/gEDA/gafrc.d/geda-clib.scm
> /usr/share/gEDA/sym/picaxe/PICAXE-14M.sym
>
> I also have a lot of files for DIP14.fp under:
>
> /usr/share/pcb/pcblib-newlib/geda/
> /home/torben/www/user/mark_salyzyn/footprints/
> /home/geda/www/user/mark_salyzyn/footprints/
>
> My problem is to connect the .sym information with the .fp.
>
> F.ex. for the OPAMP in the tutorial I find in the Edit Attributes:
>
> device OPAMP
> symversion 0.1
> refdes U101
> value T=C3=86072
>
> and in Select Component... under opamp-1.sym:
>
> description operational amplifier
> device OPAMP
> numslots 0
> refdes U?
> symversion 0.1
>
> but none of these connect me with a .fp file. Nevertheless, there is a=
> connection, because I can do the gsch2pcb-pcb/board.pcb works.

In order to associate a footprint with a symbol you have to attach
an appropriate "footprint=3D" attribute to the symbol. In your ca= se,
I believe, you have to use "footprint=3DDIP14". Please read the manual about this attribute.

--
=C2=A0 Vladimir

(=CE=BB)=CE=B5=CF=80=CF=84=CF=8C=CE=BD EDA =E2=80=94 https://github.com= /lepton-eda