X-Authentication-Warning: delorie.com: mail set sender to geda-help-bounces using -f X-Recipient: geda-help AT delorie DOT com DKIM-Signature: v=1; a=rsa-sha1; c=relaxed; d=strucktower.com; h= message-id:in-reply-to:references:date:subject:from:to :mime-version:content-type:content-transfer-encoding; s= strucktower.com; bh=C3SvCFE7IoXJ2xvmTWOS66u1e88=; b=eSWYZ8OxzFKc bFmmryPZ/PRohrGZktY55l1NyGM01ADY5JrPA2+Y8mTrGPl3/ScLz1yevfFDWzL7 K+CxQqMPJTUTPTwuj3BQPwtaeXXBPN323+Xk6UgCWtpQ6DUb4l3M9MMsY/iaboIJ mDNiglzIxM/+xypbaxHkvjlsjwXHyzY= Message-ID: <45926ff19bbc2a9811f6736d0f3f0bfe.squirrel@webmail.strucktower.com> In-Reply-To: <7B637B2F-746C-4B35-9306-7C9D4AF133F5@noqsi.com> References: <6a702c285f54d92e940b0351d8eb9453 DOT squirrel AT webmail DOT strucktower DOT com> <06685A55-7062-4617-BD75-6307E2783051 AT noqsi DOT com> <7B637B2F-746C-4B35-9306-7C9D4AF133F5 AT noqsi DOT com> Date: Fri, 16 Nov 2012 05:54:11 -0800 Subject: Re: [geda-help] New user help with gEDA- gschem, ngspice, and opamps From: keitho AT strucktower DOT com To: geda-help AT delorie DOT com User-Agent: SquirrelMail/1.4.21 MIME-Version: 1.0 Content-Type: text/plain;charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from quoted-printable to 8bit by delorie.com id qAGDsHTn016324 Reply-To: geda-help AT delorie DOT com Errors-To: nobody AT delorie DOT com X-Mailing-List: geda-help AT delorie DOT com X-Unsubscribes-To: listserv AT delorie DOT com Precedence: bulk Hi John- Thanks again. I do get "codemodel: too few args." So I assume the problem is not due to how my version of ngspice is compiled. Other ideas? Keith > > On Nov 15, 2012, at 8:12 PM, keitho AT strucktower DOT com wrote: > >>> >>> On Nov 15, 2012, at 2:29 PM, keitho AT strucktower DOT com wrote: >>> >>>> I see that gnetlist has designated my opamp with a "U" instead of an >>>> "X", >>>> not sure what that suggests. >>> >>> That's why it doesn't work. You need to start the refdes of a device >>> modeled by a subcircuit with "X". >>> >> >> Hi John- >> >> Thanks for responding. >> >> I went back into gschem and edited the refdes to now read "X8" instead >> of >> "U8". >> >> But now I get this error: >> >> ******** >> Circuit: * gnetlist -g spice-sdb --nomunge -i -o test1.net test1.sch >> >> Original line no.: 0, new internal line no.: 114: >> Undefined number [B__1] >> Original line no.: 0, new internal line no.: 114: >> Expression err: b__1) >> Original line no.: 0, new internal line no.: 114: >> Cannot compute substitute >> Original line no.: 0, new internal line no.: 115: >> Undefined number [B__1] >> Original line no.: 0, new internal line no.: 115: >> Expression err: b__1) >> Original line no.: 0, new internal line no.: 115: >> Cannot compute substitute >> Copies=124 Evals=75 Placeholders=4 Symbols=5 Errors=6 >> Numparam expansion errors: Run Spice anyway? y/n ? >> n >> >> ERROR: fatal error in ngspice, exit(1) >> keith AT t520:~/gaf$ >> >> ***** >> >> Is this due to an error in the subckt? Or something about the way I have >> configured it? >> >> I wonder- there is one line in the TI datasheet which I wasn't sure how >> to >> interpret. It looks like a line which was wrapped around but not >> designated as a continuation. >> >> Here's the subckt from the datasheet: >> >> http://www.strucktower.com/tlv274in_Page16.jpg >> >> I've marked what I interpret as one line in my tlv27x.inc. > > I believe you are correct. > >> >> The only other thing I can think of is... someone (and the manual) >> mentioned I would need to have the "--enable-xspice" function compiled >> in >> order to use these older models which use the "poly" statement. > > That is true. > >> Since I >> got this from the Debian repository I don't know if that was done or >> not. > > You can tell by typing "codemodel" at the interactive ngspice prompt. This > is an XSPICE command. If XSPICE is enabled, you get "codemodel: too few > args.", but if not you get "codemodel: no such command available in > ngspice". > > John Doty Noqsi Aerospace, Ltd. > http://www.noqsi.com/ > jpd AT noqsi DOT com > > > >