From: Andrew <andnews AT ihug DOT com DOT oz DOT au>
Newsgroups: comp.os.msdos.djgpp
Subject: Re: RHIDE and INFOVIEW Help File
Date: Wed, 28 May 2003 21:05:14 +1000
Organization: ECLiPSE
Lines: 12
Message-ID: <3n59dvkt7qvh42on32p2bgqno9ir2mrgve@4ax.com>
References: <3 DOT 0 DOT 1 DOT 16 DOT 20030527234931 DOT 33574212 AT earthlink DOT net>
NNTP-Posting-Host: p412-tnt6.syd.ihug.com.au
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
X-Trace: lust.ihug.co.nz 1054119915 8576 203.173.149.158 (28 May 2003 11:05:15 GMT)
X-Complaints-To: abuse AT ihug DOT co DOT nz
NNTP-Posting-Date: Wed, 28 May 2003 11:05:15 +0000 (UTC)
X-Newsreader: Forte Agent 1.93/32.576 English (American)
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Reply-To: djgpp AT delorie DOT com

>I just installed djgpp [ver 2.03].  When I run RHIDE I can't acces the help
>file. [attention, can't open help file 'rhide'] and [attention, can't open
>help file 'infview'].
>Which file am I missing, and in which zip file is it contained?

Looks like you are using RHide 1.5.0, if not then ignore the
following:-

Goto www.rhide.com and grab the Rhide 1.5.0.1 from the snapshot area.

Andrew