X-Authentication-Warning: delorie.com: mailnull set sender to djgpp-bounces using -f
From: eplmst AT lu DOT erisoft DOT se (Martin Stromberg)
Newsgroups: comp.os.msdos.djgpp
Subject: Re: Where  and which machine instructions ?
Date: 8 Feb 2002 08:49:03 GMT
Organization: Ericsson Erisoft AB, Sweden
Lines: 22
Message-ID: <a403dv$lug$5@antares.lu.erisoft.se>
References: <QrA88.37353$om6 DOT 938788 AT news1 DOT tin DOT it>
NNTP-Posting-Host: lws256.lu.erisoft.se
X-Newsreader: TIN [version 1.2 PL2]
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Reply-To: djgpp AT delorie DOT com

sgrb (rolando DOT sgarbi3 AT tin DOT it) wrote:
: I'm studing C and i think assembler is very important
: to learn it.My problem  is i haven't machine instrctions and

If you're studying C, then assembly shouldn't be very important.

If you're studying assembly, assembly would be very important.


: At the end in DEFINED SYMBOLS many symbols are missing (or are not
: symbols !):%eax,%ebp,%esp,%ax are not register' symbols?

%eax, etc isn't register symbols. They are the registers. 

: $16,$8 and so on are symbols of something?

$16, is an immediate value.


Right,

						MartinS