From: "Stefan Viljoen" <rylan AT intekom DOT co DOT za>
Newsgroups: comp.os.msdos.djgpp
Subject: Re: Setting mode 13h
Date: Sun, 6 Aug 2000 20:54:42 +0200
Organization: The South African Internet Exchange
Lines: 41
Message-ID: <8mm000$q7p$1@ctb-nnrp2.saix.net>
References: <jcXi5.1824$aK5 DOT 30439 AT news1 DOT online DOT no> <8mji39$fvh$13 AT ctb-nnrp2 DOT saix DOT net>
NNTP-Posting-Host: pc53-01-p120.nt.saix.net
X-Trace: ctb-nnrp2.saix.net 965641024 26873 155.239.176.120 (7 Aug 2000 09:37:04 GMT)
X-Complaints-To: abuse AT saix DOT net
NNTP-Posting-Date: 7 Aug 2000 09:37:04 GMT
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 5.00.2314.1300
X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Reply-To: djgpp AT delorie DOT com


Stefan Viljoen <rylan AT intekom DOT co DOT za> wrote in message
news:8mji39$fvh$13 AT ctb-nnrp2 DOT saix DOT net...
>
> Vermin <ratspl AT hotmail DOT com> wrote in message
> news:jcXi5.1824$aK5 DOT 30439 AT news1 DOT online DOT no...
> > I've been coding gfx for a couple of years, but I've just(!) started in
> > DJGPP. In Asm, all you do to set mode 13h is
> >
> > mov ax,13h
> > int 10h
> >
> > But it doesn't seem to be that simple in DJGPP...
> > I've tried the following piece of code with no luck:
> >
> > union REGS regs;
> > regs.x.ax=0x13;
> > int86(0x10,&regs,&regs);
> >
> > What's wrong??
>
> Don't know - if you have NASM check out my programming page
> http://home.intekom.com/rylan/prog.html - this has exactly the info you
need
> for assembly graphics programming under DJGPP in protected mode in
> 320x200x256 VGA mode.

It has come to my attention that there are errors on my programming page -
anybody not able to download anything, let me know - I'll mail it to you if
it can't otherwise!

Apologies,


--
Starwars Forever!!!

mailto:Stefan_Viljoen AT excite DOT com
http://home.intekom.com/rylan/