Message-ID: <392C866D.ED1A743F@gte.net>
From: Harlan Brown <harlanb AT gte DOT net>
X-Mailer: Mozilla 4.72 [en] (Win98; I)
X-Accept-Language: en
MIME-Version: 1.0
Newsgroups: comp.os.msdos.djgpp
Subject: Re: How to Compile in different dir than bin?
References: <392B4255 DOT DEE93584 AT gte DOT net> <8gg8i6$iq4$1 AT nets3 DOT rz DOT RWTH-Aachen DOT DE>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Lines: 23
X-Trace: /Kp2luuxd0V+Y/020ES8HINEMZhnBgCUoYm/rS9mTYr4Z9IQeuJfO29WxAO58brBUAl+WqNiBdhH!/MLAH2bj7M9KaE3sYVX9oHBimtzkHsXQvDpa2xBSe7nHIrqnCr/ZYqszHQs=
X-Complaints-To: abuse AT gte DOT net
X-Abuse-Info: Please be sure to forward a copy of ALL headers
X-Abuse-Info: Otherwise we will be unable to process your complaint properly
NNTP-Posting-Date: Thu, 25 May 2000 01:46:59 GMT
Distribution: world
Date: Thu, 25 May 2000 01:47:00 GMT
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Reply-To: djgpp AT delorie DOT com

I set up the PATH exactly as described in the readme.1st.
I did everything as instructed. Do you have any other suggestions?

Thanks
Harlan Brown
harlanb AT gte DOT net

Hans-Bernhard Broeker wrote:

> Harlan Brown <harlanb AT gte DOT net> wrote:
> > I have just started using DGJPP with the RHIDE ide.
> > I can open and compile projects in the djgpp\bin directory but if
> > I try to create project in a different directory and compile it, I get
> > the following
> > error message: Bad command or file name.
>
> That's a typical symptom of not setting up your PATH
> correctly. Re-read the 'README.1st' instructions and double-check that
> the modifications to your autoexec.bat went correctly.
> --
> Hans-Bernhard Broeker (broeker AT physik DOT rwth-aachen DOT de)
> Even if all the snow were burnt, ashes would remain.