From: Hans-Bernhard Broeker <broeker AT physik DOT rwth-aachen DOT de>
Newsgroups: comp.os.msdos.djgpp
Subject: Re: How to Compile in different dir than bin?
Date: 24 May 2000 09:48:54 GMT
Organization: Aachen University of Technology (RWTH)
Lines: 13
Distribution: world
Message-ID: <8gg8i6$iq4$1@nets3.rz.RWTH-Aachen.DE>
References: <392B4255 DOT DEE93584 AT gte DOT net>
NNTP-Posting-Host: acp3bf.physik.rwth-aachen.de
X-Trace: nets3.rz.RWTH-Aachen.DE 959161734 19268 137.226.32.75 (24 May 2000 09:48:54 GMT)
X-Complaints-To: abuse AT rwth-aachen DOT de
NNTP-Posting-Date: 24 May 2000 09:48:54 GMT
Originator: broeker@
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Reply-To: djgpp AT delorie DOT com

Harlan Brown <harlanb AT gte DOT net> wrote:
> I have just started using DGJPP with the RHIDE ide.
> I can open and compile projects in the djgpp\bin directory but if
> I try to create project in a different directory and compile it, I get
> the following
> error message: Bad command or file name.

That's a typical symptom of not setting up your PATH
correctly. Re-read the 'README.1st' instructions and double-check that
the modifications to your autoexec.bat went correctly.
-- 
Hans-Bernhard Broeker (broeker AT physik DOT rwth-aachen DOT de)
Even if all the snow were burnt, ashes would remain.