From: Flint AT noemail DOT com (Flint)
Newsgroups: comp.os.msdos.djgpp
Subject: HELP,PLEASE(newbe) enviro varible DJDIR?
Message-ID: <38405822.6778168@news.jacksonville.net>
X-Newsreader: Forte Free Agent 1.11/32.235
Lines: 63
Date: Sat, 27 Nov 1999 22:16:07 GMT
NNTP-Posting-Host: 24.129.52.76
X-Complaints-To: abuse AT mediaone DOT net
X-Trace: news2.jacksonville.net 943729816 24.129.52.76 (Sat, 27 Nov 1999 14:10:16 EST)
NNTP-Posting-Date: Sat, 27 Nov 1999 14:10:16 EST
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Reply-To: djgpp AT delorie DOT com

	I am having a problem with setting up.  Below is the
information the FAQ asked for, including 
the files I downloaded and installed.  My problem is with the RHIDE
editor.  When in DOS, at the 
prompt, I typed djgpp\bin\rhide hello,as recommended, and a window
poped up saying: RHIDE has 
detected, that the enviroment varible DJDIR has not been set ( or not
correct). This is a fatal mistake!
But, this error does not show up in the WINDOW DOS-PROMT, only when I
boot into DOS and type the 
command line above.  Where in the FAG can I find some info on this
error I am recieving,and\or any 
sugestions will be appreciated.  OS Windows98(4.10.1999 build) ,PII400
MMX,96 SDRAM.

Files downloaded:

bnu281b
csdpmi4b
djdev202
faq211b
gcc2952b
gpp2952b
lgpp295b
mak377b
txi312b
rhid147b(beta)
All installed in C:\djgpp

 Autoexec.bat readout: 
@C:\PROGRA~1\NORTON~1\NORTON~2\NAVDX.EXE /startup  
 
@ECHO OFF 
REM To make a DOS Boot Diskette; See the file C:\DOSBOOT\DOSBOOT.TXT 
 
path C:\WINDOWS;C:\WINDOWS\COMMAND  
set PATH=C:\DJGPP\BIN;%PATH%  
set DJGPP=C:\DJGPP\DJGPP.ENV ------>NOTE! djgpp.env is set to =y
 
 
SET BLASTER=A220 I7 D1 T2 
SET SNDSCAPE=C:\WINDOWS 
 
Config.sys readout: 
 REM To make a DOS Boot Diskette; See the file C:\DOSBOOT\DOSBOOT.TXT

[common]
dos=high,umb
buffers=40
device=c:\windows\himem.sys /testmem:off
DEVICE=C:\WINDOWS\EMM386.EXE RAM

rem The below DOS CD ROM driver is not required to run Windows 95.
rem DEVICE=c:\cdrom\OakCdRom.SYS /D:IDECD000  
 
 Go32-v2 readout:

DPMI memory available: 33271 KB
DPMI swap space available: 129881 KB 

Could not get a read out with the command: Set > environ.lst