From: noname AT noname DOT org (Stuart Hall)
Newsgroups: comp.os.msdos.djgpp
Subject: Re: RHIDE - Won't let me make or run!!
Date: Tue, 08 Jun 1999 12:48:19 GMT
Organization: Connix Internet
Lines: 37
Message-ID: <375d0fcf.3358290@news>
References: <7iun53$ip5$1 AT nclient5-gui DOT server DOT virgin DOT net> <928808138 DOT 521 DOT 4 AT news DOT remarQ DOT com>
NNTP-Posting-Host: m5.aetna.com
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
X-Newsreader: Forte Agent 1.5/32.452
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Reply-To: djgpp AT delorie DOT com


><7iun53$ip5$1 AT nclient5-gui DOT server DOT virgin DOT net>...
>>I am having a problem with RHIDE.  It will compile a file ( eg Hello
>World )
>>quite happily with no errors, but it will not let me Make or Build, or Run
>>them.  In the Message box after compiling there is "bad command or file
>>name".  I thought it was something to do with the directories but couldn't
>>find anything wrong.

Try going to Project menu, and choose "close project".  Then re-open
the file you wish to compile, make and run and you should be set to
go.

For whatever reason, I had the same problems that Rhide would always
start with a project open.  The only way to solve this (for me anyway)
was to open rhide from my /djgpp/bin directory, close the project
(which I didn't realize I had open), choose Save Options from the
options menu.  Exit out of rhide.

Then go back into rhide from your working directory (mine is
/djgpp/programs) and if you check your project menu "close project"
should be greyed out.

Stuart


*shoot... after re-reading your message, it appears I typed the wrong
diagnosis.  I'd never make a good doctor, I guess.  Anyway, read the
FAQ and make sure your path statement is all set, then post the
messages that the compiler is giving you.



----
Stuart Hall
Connecticut, USA
* return address:  f p r i n t f @ i n a m e . c o m *