From: Charles Krug Newsgroups: comp.os.msdos.djgpp Subject: Re: Free DJGPP-based cross-compilers available Date: Mon, 16 Nov 1998 09:52:57 -0500 Organization: Pentek Corporation Lines: 31 Message-ID: <36503C49.BC4E32BA@mail.pentek.com> References: <364F3C4C DOT 6BE31ACA AT objsw DOT com> NNTP-Posting-Host: mail.pentek.com Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Mailer: Mozilla 4.5 [en] (WinNT; U) X-Accept-Language: en To: djgpp AT delorie DOT com DJ-Gateway: from newsgroup comp.os.msdos.djgpp Reply-To: djgpp AT delorie DOT com Scott Howard wrote: > Hello, > > section 22.8 of the DJGPP FAQ ( http://www.delorie.com/djgpp/v2faq/ ) > discusses cross-compilation to embedded targets using DJGPP tools. This > FAQ was a big help to me when I built my cross compilers, and in an > attempt to give something back I have posted DJGPP-based compilers for > the Motorola M68K and Power PC, and the Hitachi SH-3 family, on my web > site, http://www.objsw.com , for free download. It is a big job to > build these compilers, and it might save people a lot of time to use > these pre-built tools. Interesting Scott. Are you aware of any DOS-32 builds of gcc that target DSP's? I'm thinking primarily of the TI tms320 series and the Analog Devices SHARC. I've seen diffs for gcc2.8.1 under Unix, but anything built for Dos32 would be a huge timesaver. Thanx Charles -- Charles Krug, Jr. Application Engineer Pentek Corp 1 Park Way Upper Saddle River, NJ 07458