From: "Guy Laroche-Joubert" <Guy DOT Laroche-Joubert AT mail DOT dotcom DOT fr>
Newsgroups: comp.os.msdos.djgpp
Subject: Re: millisecond in C++
Date: Tue, 13 Oct 1998 19:22:05 +0200
Organization: Guest of OLEANE
Lines: 21
Message-ID: <7002c8$r9g$1@minus.oleane.net>
References: <6vtd1r$h5f$1 AT minus DOT oleane DOT net> <36226856 DOT 57D05397 AT cartsys DOT com>
NNTP-Posting-Host: dialup-188.def.oleane.com
X-Trace: minus.oleane.net 908299464 27952 195.25.5.188 (13 Oct 1998 17:24:24 GMT)
X-Complaints-To: abuse AT oleane DOT net
NNTP-Posting-Date: 13 Oct 1998 17:24:24 GMT
X-Newsreader: Microsoft Outlook Express 4.72.3155.0
X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3155.0
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Reply-To: djgpp AT delorie DOT com

    Thanks guy

Nate Eldredge a écrit dans le message <36226856 DOT 57D05397 AT cartsys DOT com>...
>Edouard Laroche-Joubert wrote:
>>
>>     Hello,
>> I need to get the elapsed time between two steps and I only found how to
get
>> it in seconds but it's too long !
>>
>>     Is theire a way to get it in milliseconds or microseconds ?
>
>`clock' will report elapsed time, but it's only accurate to about 55
>ms.  `gettimeofday' may do better.  `uclock' should be very precise but
>won't work on some OS's.  Read their respective docs.
>--
>
>Nate Eldredge
>nate AT cartsys DOT com