From: Ian Chapman <ichapman AT nt DOT com>
Newsgroups: comp.os.msdos.djgpp
Subject: Re: GDB & EXE files
Date: Fri, 28 Aug 1998 11:15:56 -0400
Organization: Bell Northern Research
Lines: 16
Message-ID: <35E6C9AB.3459E493@nt.com>
References: <GZGJMR3tMAJQ AT nedcu4>
NNTP-Posting-Host: bcarib90.bnr.ca
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Precedence: bulk

Hi there,
	if you have the latest gdb it's simply a matter of "gdb file.exe" and
your there.  I do not really understand this coff thing other than I had
an older version of gdb and I had to do  somthing I did not understand
to get dgb  working.  When I updated gdb that methode failed to work and
I was told to update to the latest gdb too.

	Regards Ian.

Gautier DOT DeMontmollin AT maths DOT unine DOT ch wrote:
> 
> Is it possible to make gdb read an EXE file (and skip the stub)
> instead of doing exe2coff & gdb ?
> 
> --
> Gautier