Message-ID: <35925FD5.F05AC1EB@cue.satnet.net>
Date: Thu, 25 Jun 1998 09:33:57 -0500
From: "Ronald Patiņo G" <logan AT cue DOT satnet DOT net>
MIME-Version: 1.0
To: "djgpp AT delorie DOT com" <djgpp AT delorie DOT com>
Subject: Is there a problem running RHIDE & DJGPP under a dos window?
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Precedence: bulk

Hi, can somebody tell me if the problem i got whit RHIDe is because i'm
running it under a dos window
i got this djverify , and tested my configurations with it so i'm
sending them to see if you can give a hand configurating this thing.


    DJVERIFY -- DJGPP Installation Verification Utility -- version 0.4a

         *** Interactive Mode ***

Initializing...
Log filename = 'c:/djvr/bin/djvrfy04.log'
Examining environment...
Location of DJGPP.ENV = c:/djgpp/djgpp.env
DJGPP root directory (DJDIR) = c:/djgpp/
Loading manifest data from c:/djvr/bin/djverify.dat... done

Examining configuration...done.

Memory analysis -   Installed physical memory:   15 MB or more (*)
                    Available physical memory:   10 MB (    10,568 KB)
                    Available virtual memory:     0 MB (       704 KB)
                    Total available memory:      11 MB (    11,272 KB)

    (*) Windows NT may report less RAM than is actually installed.

 * [020] Low available memory for running DJGPP programs.

Your system may have too little available memory to run large DJGPP
programs.

  * If you have sufficient RAM, but are loading large disk caches or
    ramdrives, try reducing the memory they use.

  * If your virtual memory is very low (below 16 MB or so), you should
    try to free up some disk space, or try changing the swap file to a
    different drive.  After all, virtual memory is better than no
memory.

  * If you have sufficient memory, but are running under Windows 3.1,
    Windows 95, OS/2, or Linux, these systems may not be allowing DOS
    programs enough DPMI memory.  Refer to the documentation for your
    operating system to find out how to increase the allotment.

  * If you would otherwise have sufficient memory, but are running many
    large programs simultaneously, you should consider quitting some
before
    running any more programs.

Relevant FAQ sections:  3, 7, 15, 18.6, 18.7, and others.
CPU analysis -      CPU type:       Pentium   CPU mode:     V86 mode
                    DPMI version:   0.9       DPMI type:    32-bit
                    Virtual memory: enabled
                    Floating point processor: present

PATH  environment variable:                    Not set for DJGPP
DJGPP environment variable:                    Correct
Location of DJGPP.ENV:                         c:/djgpp/djgpp.env
Location of DJGPP BIN directory:               c:/djgpp/bin/

 ** [032] DJGPP bin directory not found in PATH.

For DJGPP to operate correctly, the PATH environment variable must
contain the
'bin' directory of your DJGPP installation.

You should edit your AUTOEXEC.BAT file and add the DJGPP bin directory
to your
PATH, preferably before any other compilers' bin directories.  (They can

interfere with the proper operation of some programs.)

Relevant FAQ sections:  6.7; see also 'readme.1st'

  -- Main DJGPP programs --                    -- Location --
          gcc.exe                              c:/djgpp/bin/
          as.exe                               c:/djgpp/bin/
          ld.exe                               c:/djgpp/bin/
          stubify.exe                          c:/djgpp/bin/
          go32-v2.exe                          c:/djgpp/bin/

  -- Optional utilities --                     -- Location --
          make.exe                             c:/djgpp/bin/

I already added C:\djgpp\bin to my autoexec path but it doesn' work
where can i configure the path varible when a dos windows start?

thankx.