From: blp01 AT uow DOT edu DOT au (Brett Porter) Newsgroups: comp.os.msdos.djgpp Subject: RHIDE 1.4.3 bugs found Date: Fri, 22 May 1998 07:08:30 GMT Organization: University of Wollongong, NSW, Australia. Lines: 31 Message-ID: <356522ad.2823517@news.uow.edu.au> Reply-To: blp01 AT uow DOT edu DOT au NNTP-Posting-Host: ceast15.uow.edu.au To: djgpp AT delorie DOT com DJ-Gateway: from newsgroup comp.os.msdos.djgpp Precedence: bulk This is for Robert (and perhaps SET) to look at. First of all, I am using the RHIDE beta, 1.4.3 (I have read about 1.4.5, but it is not on your page anywhere is it Robert?) Anyway, if these have not already been fixed... * OK is in the wrong language in the Debug | Breakpoints dialog (Anaziegn or something) * Try adding breakpoints, then go to the aformentioned dialog. Delete all breakpoints then press enter to accept Anazeign. An editor window appears with a junk filename. * This one happens regularly, but I can't figure the circumstances that cause it. I do know it happens when I have breakpoints set, or use F4/F7/F8 to start program execution, and the program has to be recompiled before it runs. After compiling, execution starts but RHIDE drops to DOS before reaching the breakpoint. (And sometimes before it does anything). Is this a known problem? If so, what causes it? If I can narrow it down any more I'll let you know. If I spot anything else, I'll let you know. Regards, Brett --------------------------------------------------- You have been graced with the knowledgable words of Brett Porter http://members.xoom.com/brett_porter "I always like to do a first draft before being spontaneous." -- The Sandman ---------------------------------------------------