From: Thomas Demmer <demmer AT LSTM DOT Ruhr-UNI-Bochum DOT De>
Newsgroups: comp.os.msdos.djgpp
Subject: Page Fault in RMCB?
Date: Wed, 13 May 1998 16:45:21 +0200
Organization: Lehrstuhl fuer Stroemungsmechanik
Lines: 24
Message-ID: <3559B200.2337525E@LSTM.Ruhr-UNI-Bochum.De>
NNTP-Posting-Host: bvb.lstm.ruhr-uni-bochum.de
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Precedence: bulk

Hi,
from time to time (but quite seldom), a 
DJGPP compiled program dies with a Page fault in RMCB.

What triggers such a fault, and what can be done to 
prevent such an error? 
The program uses Bill Currie's BCSerio, so it
does install a HW interrupt handler. Could this
one be the culprit?

-- 
Ciao
Tom

*************************************************************
* Thomas Demmer                                             *
* Lehrstuhl fuer Stroemungsmechanik                         *
* Ruhr-Uni-Bochum                                           *
* Universitaetsstr. 150                                     *
* D-44780  Bochum                                           *
* Tel: +49 234 700 6434                                     *
* Fax: +49 234 709 4162                                     *
* http://www.lstm.ruhr-uni-bochum.de/~demmer                *
*************************************************************