From: "Andrew Crabtree" <andrewc AT rosemail DOT rose DOT hp DOT com>
Newsgroups: comp.os.msdos.djgpp
Subject: Re: djgpp and 68k targets
Date: Mon, 2 Feb 1998 14:27:14 -0800
Organization: Hewlett Packard
Lines: 19
Message-ID: <6b5h7v$11i$1@rosenews.rose.hp.com>
References: <6b2tkt$k88$1 AT eros DOT clara DOT net>
NNTP-Posting-Host: ros51675cra.rose.hp.com
Mime-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Precedence: bulk


Liam Redmond wrote in message <6b2tkt$k88$1 AT eros DOT clara DOT net>...
>I wish to use djgpp to produce code for a 68000/68020 embedded target, is
>this realistic ?
Sure.  It can be done without too much work.

>I believe all I should need to do is obtain/generate a machine description
for
>the MC68000 to use with the GNU assembler 'as', is this correct ?

No.  You would need to recompile gcc from source to target the 68K.  You
would also
need to rebuild both the assembler and linker to target the 68K.  I think
the 68K is specifically mentioned
in the faq.  If not feel free to contact me via private email for help
rebuilding if needed.

Andy