Message-Id: <m0xp6nR-000S23C@inti.gov.ar>
Comments: Authenticated sender is <salvador AT natacha DOT inti DOT gov DOT ar>
From: "Salvador Eduardo Tropea (SET)" <salvador AT inti DOT gov DOT ar>
Organization: INTI
To: mwaisdn AT flash DOT net, djgpp AT delorie DOT com
Date: Mon, 5 Jan 1998 10:22:29 +0000
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT
Subject: Re: Can't save settings...
In-reply-to: <34B06A69.70BFAA22@flash.net>
Precedence: bulk

 mwaisdn <mwaisdn AT flash DOT net> wrote:

>     Here's my problem:
> 
>         I go in to Rhide 1.4, and get everything set up like I want and
> save the settings file.  As long as I do not exit I can compile programs
> and do whatever.  But after I exit rhide and come back in later the
> settings do not save automatically so I load the settings file I saved.
> The settings load up fine but when I load my program back up and go to
> the compile menu the 'run' option is grey and will not let me compile.
> 
>     Thanks for any help you give.

Make that:

1) Save your settings as rhide.gdt in the same directory that you have 
rhide.exe.

2) Use projects like that:

a) Go to the directory where your sources are.
b) Start RHIDE (all the settings about colors, etc will be restored)
c) Go to Project|Open and give a name to your new project
d) Go to the Project Window and add your sources (with insert key)
e) Press Ctrl+F9

Good luck, SET 
------------------------------------ 0 --------------------------------
Visit my home page: http://set-soft.home.ml.org/
or
http://www.geocities.com/SiliconValley/Vista/6552/
Salvador Eduardo Tropea (SET). (Electronics Engineer)
Alternative e-mail: set-sot AT usa DOT net - ICQ: 2951574
Address: Curapaligue 2124, Caseros, 3 de Febrero
Buenos Aires, (1678), ARGENTINA
TE: +(541) 759 0013