From: Charles Krug <charles AT pentek DOT com>
Newsgroups: comp.os.msdos.djgpp
Subject: Re: rhide/djgpp compile problem
Date: Fri, 02 Jan 1998 09:02:01 -0500
Lines: 22
Message-ID: <34ACF359.75A8CB85@pentek.com>
References: <883633769 DOT 291897358 AT dejanews DOT com>
NNTP-Posting-Host: mail.pentek.com
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Precedence: bulk

spork AT blue DOT misnet DOT com wrote:

> I just installed djgpp with rhide and allegro yesterday. Since then, I've
> been fooling around with it and testing things out. However, I am unable
> to compile a simple test program. When I try to compile, the message
> window shows:
>
> Compiling: test.c
> There were some errors.
>

Rhide should open a window that displays the errors.  It sounds like you're
only seeing the last line of the error message window.  Try scrolling up,
using the scroll bar on the RH side of the window.

You might also try using the compiler from the command line, to see what your
errors are :-)

--
Charles Krug, Jr.