From: budley AT world-net DOT net
Newsgroups: comp.os.msdos.djgpp
Subject: RHIDE confusion
Date: Mon, 22 Sep 1997 03:55:27 GMT
Organization: The University of Texas at Austin, Austin, Texas
Lines: 13
Message-ID: <3425eaa4.40142173@newshost.cc.utexas.edu>
NNTP-Posting-Host: slip-65-2.ots.utexas.edu
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Precedence: bulk

I started using RHIDE with Pascal sources, but only later did I
realize that making a project was essential, and the source had to be
identified as the Primary File in the project options.  So, I had some
difficulties in the beginning.  Later, however, I did successfully
compile a few Pascal progs.  Recently, though, even when I've done all
the above steps, when I try to compile RHIDE says "executing:  " with
no command following.  This happens on C++ files and Pascal files, but
seemingly never on C sources.  I believe this is merely a screwed up
setting, because I've had few or no problems in the past.  Any help
would be appreciated, thanks.

Brad Peterson
zif AT mail DOT utexas DOT edu