From: jll AT olivia DOT nst DOT dk (Jorgen Lehmann)
Newsgroups: comp.os.msdos.djgpp
Subject: Serial Problems, can you help ??
Reply-To: jll AT nst DOT dk
Message-ID: <slrn621qag.b22.jll@olivia.nst.dk>
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit
NNTP-Posting-Host: 194.234.160.47
Date: 18 Sep 97 08:56:00 GMT
Lines: 47
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Precedence: bulk


Hi all, 

I need to do a little serial communication, using djgpp v201,
so i got the "bcsio20" package from a ftp-site and did a make..

It does compile nicely, but it doesn't seem to work...

Even the example programs gives an error message saying something
like:

Exiting due to signal SIGILL
Invalid Opcode at eip=0000b584
...
<some stuff>
...
        ...  program=C:\SERIAL\TEST\STL\TERM.EXE
...
<even more stuff>
...


The libraries/program was compiled and tried run on a
pentium with 16550 uarts and an old 80386 with 16450 uarts
but with the same results...

After this i tried the "aeasy" package from a "1tk" directory
but I got the same results  :-(

Am I doing something wrong here ??
Should I use another library, and which one ??

I'd appreciate your help

Regards

Jørgen Lehmann


-- 

"...and what is the use of a book," thought    |  J. Lehmann //  jll AT nst DOT dk
Alice, "without pictures or conversations?"    |  The opinions are my own, 
                                               |  and they probably scare 
                     --Alice in Wonderland.    |  my employer...