From: stever <sredpath AT dy4 DOT com>
Newsgroups: comp.os.msdos.djgpp
Subject: keyb. prob. with RHIDE
Date: Wed, 13 Aug 1997 09:55:27 +0100
Organization: dy4
Lines: 22
Message-ID: <33F1767F.6CFB1B7E@dy4.com>
Reply-To: sredpath AT dy4 DOT com
NNTP-Posting-Host: ukpc1.dy4.com
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Precedence: bulk

I am using RHIDE 1.3 and having difficulty entering the bit wise OR
symbol from the key board. If I type the 'pipe' symbol it appears on the
screen as two vertical lines one above the other as shown on the key but
the compiler gives a 'parse error'. If I type 'Alt' 124 (the ASCII value
for the pipe symbol) I get one continuous vertical line and the compiler
excepts it.

I have tried copying the uk.txt file into the keybind.txt file with the
same results. I have compiled and ran the scancodes program from the
RHIDE help files and the pipe key gives 56DD, scan code:86 whereas the
'Alt' 124 key stokes give 007C, scan code:0.

Is there something else I need to do or am I stuck with using 'Alt' 124.

I am using a UK Win95 Keyboard and runing under win95.

Regards
Steve Redpath
DY4 Systems