From: John Trezza <jtrezza AT mailgw DOT sanders DOT lockheed DOT com>
Newsgroups: comp.os.msdos.djgpp
Subject: writing to parallel port
Date: Wed, 02 Jul 1997 19:51:35 -0400
Organization: Sanders, A Lockheed Martin Company
Lines: 15
Message-ID: <33BAE987.862B30D1@mailgw.sanders.lockheed.com>
NNTP-Posting-Host: shv3prt1.sanders.lockheed.com
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Precedence: bulk

I'd like to use djgpp to write data to the parallel port.  I know that
djgpp 2.0 has
its own versions of outpw , etc. and I found the instructions on how to
use those
commands, but I don't know what address the parallel port is or whether
there is
another set of commands that should be used to write output to the PC
parallel
port.  Any information (or pointers to where the info would be located)
would be
greatly appreciated.

John
jtrezza AT mailgw DOT sanders DOT lockheed DOT com