From: Robert Hoehne <Robert DOT Hoehne AT Mathematik DOT tu-chemnitz DOT de>
Newsgroups: comp.os.msdos.djgpp
Subject: Re: Bison and RHIDE
Date: Mon, 09 Jun 1997 10:39:42 +0200
Organization: TU Chemnitz-Zwickau
Message-ID: <339BC14E.5EE93A52@Mathematik.tu-chemnitz.de>
References: <5n0e7m$648 AT freenet-news DOT carleton DOT ca> <339532AD DOT 41C6 AT LSTM DOT Ruhr-UNI-Bochum DOT De> <3395362A DOT 46A38DD1 AT Mathematik DOT tu-chemnitz DOT de> <5n848r$aor AT freenet-news DOT carleton DOT ca>
NNTP-Posting-Host: pandora.hrz.tu-chemnitz.de
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit
Lines: 33
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Precedence: bulk

Paul Derbyshire wrote:
> 
> Robert Hoehne (Robert DOT Hoehne AT Mathematik DOT tu-chemnitz DOT de) writes:
> > redir -e env rhide -E
> 
> That doesn't work:
> C:\djgpp>rhide -E
> This is RHIDE Version 1.1b. Copyright (c) 1996,1997 by Robert Höhne

Do you read sometimes my posts??

> > If you are using RHIDE 1.2c you can print out also all in RHIDE builtin
> > variables and specs by running
> > 
> > redir -e env rhide -E

As you can see I said that you need RHIDE 1.2c and you are are using
1.1b, which is really not the best choise.

> Like RHIDE_COMPILE.c.o is "gcc -c $(RHIDE_SOURCE) -o $(???)"  ???

I do not speak here about RHIDE before version 1.2 because I haven't
it anymore. But in the doc for RHIDE 1.2 there is a section
(4.6 Builtin variables) which should answer your question.

Robert
-- 
*****************************************************************
* Robert Hoehne, Fakultaet fuer Mathematik, TU-Chemnitz-Zwickau *
* Post:    Am Berg 3, D-09573 Dittmannsdorf                     *
* e-Mail:  Robert DOT Hoehne AT Mathematik DOT TU-Chemnitz DOT DE              *
* WWW:     http://www.tu-chemnitz.de/~rho                       *
*****************************************************************