Newsgroups: comp.os.msdos.djgpp
From: Elliott Oti <e DOT oti AT stud DOT warande DOT ruu DOT nl>
Subject: Allegro: Problems after HD crash
Sender: usenet AT fys DOT ruu DOT nl (News system Tijgertje)
Message-ID: <33459912.6907@stud.warande.ruu.nl>
Date: Sat, 5 Apr 1997 00:13:06 GMT
Reply-To: e DOT oti AT stud DOT warande DOT ruu DOT nl
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=us-ascii
Mime-Version: 1.0
Organization: The Gauge Variance Promotion Society
Lines: 21
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp

A couple of weeks ago I got my DX4-100 up and running again after a HD
crash,
but I've run into problems specifically with Allegro programs. The demo
and
examples 22 - 25 don't run anymore -- they exit with an
"out-of-conventional
memory" error, while example 21 runs very slowly.(I have 588 K
conventional)
All my own software linked with Allegro doesn't work anymore either.I
use QEMM 7 and NDOS, and  without autoexec.bat or config.sys loaded the
Allegro programs 
work fine. Yes I have tried commenting out these files one line at a
time to try and isolate the problem, but that didn't help: it works
*only* when autoexec.bat and config.sys are not loaded. Using EMM386
instead of QEMM didn't help either. Before the
HD crash Allegro worked just fine.

Any ideas?

------------ Elliott Oti ---------------
   ------------- http://www.fys.ruu.nl/~oti  ---------