From: ekawibe AT eka DOT ericsson DOT se (Wim Van Berlo)
Newsgroups: comp.os.msdos.djgpp
Subject: Re: RHIDE and WinNT 4.0
Date: 19 Mar 1997 09:08:20 GMT
Organization: Ericsson Components AB
Lines: 28
Message-ID: <5goae4$5md@newstoo.ericsson.se>
References: <332a234c DOT 14141844 AT news DOT cc DOT columbia DOT edu> <332D3332 DOT 2902 AT Mathematik DOT tu-chemnitz DOT de> <332e3358 DOT 4696162 AT news DOT cc DOT columbia DOT edu>
NNTP-Posting-Host: ekapc758.eka.ericsson.se
Mime-Version: 1.0
Content-Type: Text/Plain; charset=US-ASCII
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp

In article <332e3358 DOT 4696162 AT news DOT cc DOT columbia DOT edu>, cpw10 AT columbia DOT edu says...
>
>Hi.  Thanks for the tip.  However, I'm still unable to get mouse support
>in RHIDE with the new version.  Perhaps you can enlighten me:  in a
>command prompt window, I type "rhide -M".  The hard drive goes, and then
>nothing happens.  If I type "rhide -M" again, then the program loads.
>This happened in the older version as well.  Any ideas as to what is
>happening?  With this peculiar behavior, I cannot create a .pif file that
>will run RHIDE with mouse drivers, etc.  Thanks for the help.  Also, if
>anyone out there has been able to get RHIDE 1.2 to work under WinNT 4.0,
>please e-mail me your help..
>
>TIA,
>Chester
>
You're not the first one with mouse trouble.
Here's the tip I got from Robert Hoehne:
set the screen mode to 80x28, and the mouse should
appear. You can also try some other screen modes;
80x50 and 80x25 don't seem to work.

Sorry, can't help you with the W-NT problem; I run
RHIDE under DOS (W-3.11).

Good luck

Wim van Berlo