From: suma AT xtra DOT co DOT nz (Alex Clifford Henderson)
Newsgroups: comp.os.msdos.djgpp
Subject: Rhide & invisible lines.
Date: Wed, 15 Jan 1997 15:03:07 GMT
Organization: TWINS Software
Lines: 27
Message-ID: <5bk2kt$ep35@wolfman.xtra.co.nz>
NNTP-Posting-Host: 203.96.105.81
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp

hi, while using SET? the editor built into Rhide, sometimes (but not
always) I will backspace and atempt to get a line to jump up one line
(popping from the left side of screen out onto the line above at the
end of what ever is on that line, and the line will become "invisible"
it is still there for all intensive purposes but non-visible.. pushing
enter gets on the next line again. normally if this happens often then
another really weird thing will happen (this has only ever happened
twice) and about 20+ lines  at the bottom of a source file will become
double up so that every line is shown twice... but saving this file
doesn't save it in that form, but it's original.

I got rhide after around xmas, so Im pretty sure its the latest (or
near to it) and Im running under dos 6.22/wfw 3.11 (either) and
normally have about 2-3mb real ram free...

reply by mail if possible, please.
--                                          ////
                                           /'^'\
                                     \\\\ (\0-0/) ////
  /----------------------------------oOOOO--(_)--OOOOo--\
 | Alex Henderson a.k.a Suma (@@=@)  Twins Software NZ   |
 | email: Suma@@xtra.co.nz !!no junk!! (^^\   1997-1998  |
  \-------------------------------------\ (--|--/^^)----/
                                         \_) |  ) /
                                         *   | (_/
                                         \__/