From: "John M. Aldrich" <fighteer AT cs DOT com>
Newsgroups: comp.os.msdos.djgpp
Subject: Re: compile error: cannot open crt0.o
Date: Wed, 08 Jan 1997 21:13:35 -0800
Organization: Two pounds of chaos and a pinch of salt
Lines: 23
Message-ID: <32D47E7F.2D4B@cs.com>
References: <5b0fkp$nv8 AT acad DOT suffolk DOT edu>
Reply-To: fighteer AT cs DOT com
NNTP-Posting-Host: ppp107.cs.com
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp

vcocco wrote:
> 
> gcc hello.c -o hello.exe <cr>
> c:\djpgg\bin/ld.exe:  cannot open crt0.o:
> no such file or directory".
> Any suggestions?

This appears to be a configuration problem.  Make sure that you have set
the DJGPP environment variable in your AUTOEXEC.BAT as instructed in the
'readme.1st' file, and that you don't have any extraneous definitions of
the C_INCLUDE_PATH and LIBRARY_PATH environment variables.

If this doesn't work, get the DJGPP Frequently Asked Questions list
(v2/faq202b.zip) and look in chapter 8 for hints.  As a last resort,
refer to chapter 6.12 for instructions on posting details of your
configuration to the newsgroup.

-- 
---------------------------------------------------------------------
| John M. Aldrich, aka Fighteer I |        fighteer AT cs DOT com          |
| Proud owner of what might one   |   http://www.cs.com/fighteer    |
| day be a spectacular MUD...     | Plan: To make Bill Gates suffer |
---------------------------------------------------------------------