X-Authentication-Warning: delorie.com: mail set sender to djgpp-bounces using -f From: "Mike C" Newsgroups: comp.os.msdos.djgpp References: <43f938ed DOT sandmann AT clio DOT rice DOT edu> Subject: Re: Grevious RHIDE fault Lines: 128 X-Priority: 3 X-MSMail-Priority: Normal X-Newsreader: Microsoft Outlook Express 6.00.2800.1409 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1409 Message-ID: Date: Wed, 22 Feb 2006 00:05:34 GMT NNTP-Posting-Host: 86.13.155.138 X-Complaints-To: http://www.ntlworld.com/netreport X-Trace: newsfe3-win.ntli.net 1140566734 86.13.155.138 (Wed, 22 Feb 2006 00:05:34 GMT) NNTP-Posting-Date: Wed, 22 Feb 2006 00:05:34 GMT Organization: ntl Cablemodem News Service To: djgpp AT delorie DOT com DJ-Gateway: from newsgroup comp.os.msdos.djgpp Reply-To: djgpp AT delorie DOT com "Charles Sandmann" wrote in message news:43f938ed DOT sandmann AT clio DOT rice DOT edu... > > ebp=002edaec esp=002edab4 program=d:\djgpp\Files\Serial\slave.exe > > cs: sel=01a7 base=01cc0000 limit=7e32ffff > > Your program (or RHIDE) is linked with an older version of djgpp which > doesn't know about NT/W2K/XP's issues with address wrap (W2K silently > changes the limit requested to the one above). The date on all binaries > should be dated December 2001 or newer. > > I'm not sure if this will fix all of your problems, but it would be > something to fix first. > Well, Folks, I have re-installed DJGPP, RHIDE and all other files recommended by the Zip picker - and I wish I hadn't. My PC: Toshiba Tecra 8200 laptop OS: Win2000 SP4 256MByte RAM. I followed the installation instructions, unzipping with unzip32.exe, and telling it to overwrite everything. When I ran RHIDE, I found that it would exit to DOS if I pressed F1, or did a number of other things. I checked that the Environmental variables and path were still set, and they were. I deleted everything from the DJGPP directory and verified it was empty, then re-downloaded the files from delorie.com and re-installed everything, but I still have exactly the same fault. If I press F1, RHIDE exits, and on the screen, I have SHELL= COMSPEC=C:\WINNT\SYSTEM32\COMMAND.COM DJSYSFLAGS= My problem is the following: ============================ RHIDE internal error. Please send a description of this situation as most as possible detailed to the author together with the version you are using. AND VERY IMPORTANT IS THE NEXT TRACEBACK!!!! Exiting due to signal SIGABRT Division by Zero at eip=0000b2d1, x87 status=4000 eax=000000c8 ebx=00391c24 ecx=00000000 edx=0000000a esi=00391c08 edi=0002ba53 ebp=00391ba0 esp=00391b78 program=D:\DJGPP\BIN\RHIDE.EXE cs: sel=01a7 base=01cc0000 limit=003fffff ds: sel=01af base=01cc0000 limit=003fffff es: sel=01af base=01cc0000 limit=003fffff fs: sel=01bf base=00000000 limit=0010ffff gs: sel=01bf base=00000000 limit=0010ffff ss: sel=01af base=01cc0000 limit=003fffff App stack: [00391db0..00311db0] Exceptn stack: [003114e0..0030f5a0] Call frame traceback EIPs: 0x0000b2d1 0x0023d6e7 0x0023d085 0x0004c179 0x0002be42 0x0002bfdc 0x0002bdca 0x0000739d 0x00226d82 0x002264e0 0x0000ba5e 0x00289d58 D:\djgpp\Files\MIGRAT~1> If I use Alt-F, O to open a file, it brings up the open file box - I select a file and press Enter. It instantly exits and gives me LANGUAGE= SHELL= COMSPEC=C:\WINNT\SYSTEM32\COMMAND.COM DJSYSFLAGS= My problem is the following: ============================ RHIDE internal error. Please send a description of this situation as most as possible detailed to the author together with the version you are using. AND VERY IMPORTANT IS THE NEXT TRACEBACK!!!! Exiting due to signal SIGABRT Division by Zero at eip=0000b2d1, x87 status=4000 eax=000000c8 ebx=003918d4 ecx=00000000 edx=0000000a esi=003918b8 edi=00391930 ebp=00391850 esp=00391828 program=D:\DJGPP\BIN\RHIDE.EXE cs: sel=01a7 base=01cc0000 limit=003fffff ds: sel=01af base=01cc0000 limit=003fffff es: sel=01af base=01cc0000 limit=003fffff fs: sel=01bf base=00000000 limit=0010ffff gs: sel=01bf base=00000000 limit=0010ffff ss: sel=01af base=01cc0000 limit=003fffff App stack: [00391db0..00311db0] Exceptn stack: [003114e0..0030f5a0] Call frame traceback EIPs: 0x0000b2d1 0x0023d6e7 0x0023d085 0x0004c179 0x0002aa49 0x0000bc12 0x00008ba7 0x00226d94 0x002264e0 0x0000ba5e 0x00289d58 D:\djgpp\Files\MIGRAT~1> I know that the package works elsewhere. What am I doing wrong? Mike.