X-Authentication-Warning: delorie.com: mail set sender to djgpp-bounces using -f
From: PaulCsouls <paulcsouls AT worldnet DOT att DOT net>
Newsgroups: comp.os.msdos.djgpp
Subject: Re: Parallel Port in Win 2000
Message-ID: <5i0a815be4nlidmfairb01ll1rtrhha7q2@4ax.com>
References: <k42381l8qfeh7qqgj0c6257j5elei5jhjp AT 4ax DOT com> <opsqlpmyn4rt0xh7 AT jo>
X-Newsreader: Forte Agent 2.0/32.652
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Lines: 28
Date: Fri, 13 May 2005 19:41:22 GMT
NNTP-Posting-Host: 12.72.218.64
X-Complaints-To: abuse AT worldnet DOT att DOT net
X-Trace: bgtnsc05-news.ops.worldnet.att.net 1116013282 12.72.218.64 (Fri, 13 May 2005 19:41:22 GMT)
NNTP-Posting-Date: Fri, 13 May 2005 19:41:22 GMT
Organization: AT&T Worldnet
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Reply-To: djgpp AT delorie DOT com

On Wed, 11 May 2005 07:55:39 GMT, "Giorgio Medeot" <gmedeo AT tin DOT it>
wrote:

>In data Wed, 11 May 2005 04:26:52 GMT, PaulCsouls  
><paulcsouls AT worldnet DOT att DOT net> ha scritto:
>
>> I've written some  programs that use the Parallel Port and work well
>> in Win 98, but do not work in Win 2000. I've read in the FAQ about
>> some  glitches with the serial port in NT. Do these apply in Win 2000?
>> Can I access LPT1 from a DOS box in Win2000?
>>
>> Thanks
>>
>> Paul C
>
>You may try http://www.beyondlogic.org/porttalk/porttalk.htm
>See use of the allowio.exe application.
>
>Regards,
>          Giorgio

PortTalk works but I needed to allow it access to all Ports even
though the Port address is listed as 0x378 in the Device Manager and
0x378 is what I'm using in the program.

Thanks
Paul