From: JMK <jeffrey DOT m DOT klopotic AT lmco DOT nospam DOT com>
Newsgroups: comp.os.msdos.djgpp
Subject: Re: My NT installation wants '\' in the dir command
Date: Mon, 11 Nov 2002 12:03:36 -0800
Organization: Lockheed Martin Corporation
Lines: 39
Message-ID: <3DD00D18.4E4880F0@lmco.nospam.com>
References: <B66B0B4BF675D411BDCF00508BE32B120C8D3834 AT emss01m06 DOT ems DOT lmco DOT com> <Xns92BFB5DA5F0DCasu1cornelledu AT 132 DOT 236 DOT 56 DOT 8> <3DCC16AF DOT C3FEB582 AT lmco DOT nospam DOT com> <Xns92C0B612450EEasu1cornelledu AT 132 DOT 236 DOT 56 DOT 8>
NNTP-Posting-Host: 129.197.49.226
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
X-Mailer: Mozilla 4.61 [en] (WinNT; U)
X-Accept-Language: en
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Reply-To: djgpp AT delorie DOT com

Sinan,

Thanks for the response.

What I was trying to illustrate was that if you type a dir command in a
dos window in Win2000 or NT,

> dir c:/dirA/dirB/filename.ext  will not work

but

> dir c:\dirA\dirB\filename.ext does work

on my computer.

When I did the installation of djgpp, I did successfully get
longfilename support as evidenced by doing a dir and finding 


sysmacros.h

instead of 

sysmacro.h

per the installation instruction in the README.1st file contained in
djgpp.

It turns out that there is a long filename problem on NT (support was
just not included with NT!) which is addressed by the NTLFN08b.zip file
and made my compilation work.

FWIW, I did not know that you can use either "cmd" or "command.com" in
the Run window to launch DOS.  I know they are different, and it appears
that not knowing about the difference can cause confusion also.

But thank you again for discussing the issue -- it helps.

Jeff