From: Tim Updegrove <tupdegrove AT lucent DOT com>
Newsgroups: comp.os.msdos.djgpp
Subject: Re: uclock failure at midnight
Date: Tue, 20 Jun 2000 09:26:42 -0400
Organization: Lucent Technologies
Lines: 24
Message-ID: <394F7112.EF6A5F53@lucent.com>
References: <Pine DOT SUN DOT 3 DOT 91 DOT 1000613132717 DOT 16888R-100000 AT is> <3947E438 DOT 814C7F47 AT lucent DOT com> <200006181724 DOT UAA15716 AT mailgw1 DOT netvision DOT net DOT il>
NNTP-Posting-Host: pai830tupdegrove.micro.lucent.com
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
X-Mailer: Mozilla 4.61 [en] (Win95; I)
X-Accept-Language: en
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Reply-To: djgpp AT delorie DOT com

I found out the program fails on a Dell XPS T500 (P3 500 Mhz) and Dell XPS 700r
(P3 700 Mhz) booting directly to MS-DOS that comes with Win98se.  It works fine on
a Gateway ~500 Mhz and Compaq with Celeron ~400 Mhz.  Any chance someone can try
it on a Dell machine?  Do you need to know hardware chip set or something?

Eli Zaretskii wrote:

> > From: Tim Updegrove <tupdegrove AT lucent DOT com>
> > Newsgroups: comp.os.msdos.djgpp
> > Date: Wed, 14 Jun 2000 15:59:52 -0400
> >
> > I'm running v2.03.  The failure only occurs when booting directly to MS-DOS
> > (it doesn't fail in a dos box under Win98SE).  Here is small test case.  Use
> > the "time" command to set the time 15 seconds or so before midnight and run
> > the test.
>
> Sorry, I cannot reproduce this problem: your test program works
> flawlessly for me on plain DOS system.  I tried it several times, and
> it didn't print any error messages.
>
> Perhaps you have some software installed on your machine that causes
> this problem.  How about posting details about your system
> configuration?