Message-ID: <001101bf93d1$be373400$23652fc2@univ.vxu.se>
From: "Niklas Pettersson" <npedt97 AT student DOT vxu DOT se>
To: <djgpp AT delorie DOT com>
References: <38D751F7 DOT 2921BCF4 AT bologna DOT enea DOT it>
Subject: Re: From INTEL to AT&T asm dos coverter
Date: Wed, 22 Mar 2000 08:39:23 +0100
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 5.00.2919.6600
X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600
Reply-To: djgpp AT delorie DOT com

There is another way also.. It was however several years since I converted
my source so I don't remember exactly how I did but I'm sure you can figure
it out.
First of all I compiled the intel-asm with some assembler. Then I
reversed-enginered the object code with some other tool into at&t syntax. If
a remember correctly I used the Watcom assembler. It was several hundred
lines of code and it worked perfectly.

/ Niklas





----- Original Message -----
From: "Rinaldo Guaraldi" <guaraldi AT bologna DOT enea DOT it>
Newsgroups: comp.os.msdos.djgpp
To: <djgpp AT delorie DOT com>
Sent: Tuesday, March 21, 2000 11:41 AM
Subject: From INTEL to AT&T asm dos coverter


> Is there a Dos utlitity to convert an existing
> I-386 assembler input
> from intel sintax (as Borland, Microsoft sources)
> to at&t sintax as used by Gnu GAS assembler ?
>                       Thank you - Guaraldi R.
>
>