From: "pwillard" <pwillard AT mediaone DOT net>
Newsgroups: comp.os.msdos.djgpp
Subject: I need to advice on timing...
Lines: 14
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 5.00.2014.211
X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211
Message-ID: <3T6l4.3418$i43.21114@typhoon.southeast.rr.com>
Date: Mon, 31 Jan 2000 02:58:07 GMT
NNTP-Posting-Host: 24.31.125.207
X-Complaints-To: abuse AT mediaone DOT net
X-Trace: typhoon.southeast.rr.com 949287487 24.31.125.207 (Sun, 30 Jan 2000 21:58:07 EST)
NNTP-Posting-Date: Sun, 30 Jan 2000 21:58:07 EST
Organization: MediaOne - Atlanta
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Reply-To: djgpp AT delorie DOT com

I'm wondering if this is possible or not.

    I need to touch external hardware through the parallel port and so far,
doing that hasn't been a problem.  Now, I need  to control the timing of
signals sent to the external hardware.  I can sucessfully create a 50
millisecond pulse using the 8259 clock stuff, but I have no clue how to
generate a shorter than 1 millisecond signal.  I now need a 10, and a 50
MICROSECOND signal and I'm not sure if I can.... IS it possible?


For the curious... I need to toggle a single data bit on the parralel port
with an on time of  50milliseconds.