From: "Florian Xaver" <dos DOT fire AT aon DOT at>
Newsgroups: comp.os.msdos.djgpp
References: <85a6ll$113$1 AT nclient11-gui DOT server DOT virgin DOT net>
Subject: Re: Moving Error
Date: Sun, 9 Jan 2000 19:26:21 +0100
X-Newsreader: Microsoft Outlook Express 4.71.1712.3
X-MimeOLE: Produced By Microsoft MimeOLE V4.71.1712.3
Lines: 25
Message-ID: <3879d813$0$23974@SSP1NO17.highway.telekom.at>
NNTP-Posting-Host: 212.183.100.179
X-Trace: newsreader.vienna.highway.telekom.at 947509267 23974 212.183.100.179
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Reply-To: djgpp AT delorie DOT com

I think, it is a memory error. Mabe you didn't set a variable 0
(Audiostream), or a arry is too small, etc.


Gary Smith schrieb in Nachricht
<85a6ll$113$1 AT nclient11-gui DOT server DOT virgin DOT net>...
>Help,
>
>I have written a program using the latest Allegro WIP and VC5. The program
>compiles OK with no error messages or warnings.  However when I run it it
>terminates.  I traced the termination point to a blit command.
>By remming this command out the program worked.
>
>After this I went through the program and removed a few remark lines (ie
>// ).  Now the program terminates at another blit command elsewhere in the
>program.  The termination point seems to vary when code is added or removed
>from the program, but always terminates at a blit command.
>
>Any ideas ?
>
>
>
>