From: "Gary Smith" <gwme AT kagi DOT com>
Newsgroups: comp.os.msdos.djgpp
Subject: Moving Error
Date: Sun, 9 Jan 2000 14:42:37 -0000
Organization: Virgin Net Usenet Service
Lines: 17
Message-ID: <85a6ll$113$1@nclient11-gui.server.virgin.net>
NNTP-Posting-Host: p26-partridge-gui.tch.virgin.net
X-Trace: nclient11-gui.server.virgin.net 947428853 1059 194.168.71.146 (9 Jan 2000 14:40:53 GMT)
X-Complaints-To: abuse AT virgin DOT net
NNTP-Posting-Date: 9 Jan 2000 14:40:53 GMT
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 5.00.2314.1300
X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Reply-To: djgpp AT delorie DOT com

Help,

I have written a program using the latest Allegro WIP and VC5. The program
compiles OK with no error messages or warnings.  However when I run it it
terminates.  I traced the termination point to a blit command.
By remming this command out the program worked.

After this I went through the program and removed a few remark lines (ie
// ).  Now the program terminates at another blit command elsewhere in the
program.  The termination point seems to vary when code is added or removed
from the program, but always terminates at a blit command.

Any ideas ?