From: James Vasile <Vasile AT IName DOT com>
Newsgroups: comp.os.msdos.djgpp
Subject: Re: Question to challenge
Date: Wed, 20 Oct 1999 03:29:44 -0400
Organization: Columbia University
Lines: 34
Message-ID: <J28NOKMkFsmYJjtkb05x7Nsber5R@4ax.com>
References: <19990728185431 DOT 01166 DOT 00000140 AT ng-xc1 DOT aol DOT com> <933235278 DOT 19009 AT www DOT remarq DOT com>
NNTP-Posting-Host: dialup-cc3-23.cc.columbia.edu
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
X-Trace: newsmaster.cc.columbia.edu 940404530 10637 128.59.42.128 (20 Oct 1999 07:28:50 GMT)
X-Complaints-To: postmaster AT columbia DOT edu
NNTP-Posting-Date: 20 Oct 1999 07:28:50 GMT
X-Newsreader: Forte Agent 1.6/32.525
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Reply-To: djgpp AT delorie DOT com

I've not used it, but Portmon might come in handy.
You can get more info at http://www.sysinternals.com/portmon.htm

Peace,
-James

On Thu, 29 Jul 1999 00:01:15 -0800, Clemens Valens
<c DOT valens AT mindless DOT com> wrote:

>I guess you will have to crack a serial protocol here (I am
>assuming that they communicate through a serial port). This
>you could do by inserting a second PC that taps into the
>serial line and logs all communication. There are several
>possibilities to do this. Log the initialization and all
>the controls and do a bit of analyzing. I don't think it is
>very difficult.
>
>It might help if you were a little bit more specific about
>the scales, like make, type, etc.
>
>But then again, maybe you can use this program:
>
>PEL Pelouze Scale Company at
>
>http://www.keysan.com/~keysan/ksu0182.htm
>
>Good luck,
>Clemens
>
>
>
>* Sent from RemarQ http://www.remarq.com The Internet's Discussion Network *
>The fastest and easiest way to search and participate in Usenet - Free!