From: "Peter S'heeren" <petersh AT pimc DOT be>
Newsgroups: comp.os.msdos.djgpp
Subject: Re: Writing an OS
Date: Wed, 28 Apr 1999 09:37:33 +0200
Organization: EUnet Belgium, Leuven, Belgium
Lines: 29
Message-ID: <3726BABD.7C67262@pimc.be>
References: <Pine DOT SOL DOT 3 DOT 91 DOT 990427134359 DOT 3388A AT travelers DOT mail DOT cornell DOT edu> <372637F4 DOT 921 AT erols DOT com>
NNTP-Posting-Host: 193.74.115.160
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
X-Mailer: Mozilla 4.5 [en] (Win98; I)
X-Accept-Language: en
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Reply-To: djgpp AT delorie DOT com


There's a ATAPI command called "Set CD Speed" and it has opcode 0BBh.
You can set the read & write speeds in kB/sec. This is the format of the
command:

+00 : BYTE  0BBh
+01 : BYTE  reserved
+02 : WORD  Read speed in kB/ec
+04 : WORD  Write speed in kB/sec
+05 : BYTE  reserved
+06 : BYTE  reserved
+07 : BYTE  reserved
+08 : BYTE  reserved
+09 : BYTE  reserved
+10 : BYTE  reserved
+11 : BYTE  reserved

All fields are big endian.

I think some drives allow you to change the speed settings the means of
the "Mode Select" command (see: Capabilities and Mechanical Status Page,
code 2Ah). You've to "Mode Sense" first, however, to check out if the
speed fields can be modified.

Good luck

Peter S'heeren