From: Dries van Oosten Newsgroups: comp.os.msdos.djgpp Subject: allegro:sb16 autodetect. Date: Wed, 17 Mar 1999 14:45:38 +0100 Organization: Academic Computer Centre Utrecht, (ACCU) Lines: 31 Message-ID: NNTP-Posting-Host: ruunat.phys.uu.nl Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII To: djgpp AT delorie DOT com DJ-Gateway: from newsgroup comp.os.msdos.djgpp Reply-To: djgpp AT delorie DOT com I have recently installed djgpp and the allegro library on my 486 dx4 100MHz. I am very happy that I now have the djgpp compiler on my dos based pc, as have I been using it on a UNIX machine in my working enviroment for quite some time. However, I am experiencing some difficulty in getting the allegro sound routines to work. The midi routine seem to work ok, but can't get the sample playing routines to work. The allegro docs state that there is no reason you should not use DIGI_AUTODETECT when calling install_sound(), well, I found one. install_sound sees my sb16 on irq 7 while it is installed on irq 5. The docs also state that irq 7 is the usual irq, but this is not my experience. My experience is that on ibm-compatibles the soundblaster goes to irq 5. Any thoughts on the subject or tips. Is this a problem in the allegro library or in my system. If it's a problem in my system, why don't I experience it playing commercial games like doom? Any input would be appreciated, but please don't flame me if there is an obscure faq somewhere where I could have found it, the installation proces has given me enough headaches as it is. (harddisk crashed the first time, arj archive was corrupted the second time and my diskdrives died on my the third time, luckely I had an old one lying around, so in the end it all worked out, and my computer came out of the proces somewhat mutilated, but I have grown more attached to it in the proces. I try to see it as a learning experience *grin*). Groeten, Dries // I don't care if he has been rogering the duke of York // with a pricewinning leek. // Standard disclaimer applies.