Message-Id: <m0yjPLe-000S40C@inti.gov.ar>
Comments: Authenticated sender is <salvador AT natacha DOT inti DOT gov DOT ar>
From: "Salvador Eduardo Tropea (SET)" <salvador AT inti DOT gov DOT ar>
Organization: INTI
To: slapierr AT acs2 DOT acs DOT ucalgary DOT ca (Soleil Lapierre), lapierrs AT cuug DOT ab DOT ca,
        djgpp AT delorie DOT com
Date: Tue, 9 Jun 1998 11:29:55 +0000
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT
Subject: Re: RHIDE command-line length limit?
In-reply-to: <6lglca$g50@ds2.acs.ucalgary.ca>
Precedence: bulk

slapierr AT acs2 DOT acs DOT ucalgary DOT ca (Soleil Lapierre) wrote:

> Anyway, after the project grew to a certain number of files, linking 
> would fail under RHIDE. By playing around with the number of optimization 
> flags I had turned on, I discovered that the problem was that the command 
> line was getting chopped off. So I made a makefile. Shelling out and 
> running make worked fine, no matter how long the command line it generated.
> 
> My question is this: Is there a way around this command line length 
> limitation in RHIDE? It's a hassle to shell out every time I want to 
> rebuild. 

I think you are mixing DJGPP v2.00 and DJGPP v2.01 exes. The methode used to 
pass parameters changed in 2.01. A lot of users had problems some time ago. 
Looks like you have RHIDE compiled with 2.01 and gcc/ld/make/etc from 2.00.

Just upgrade to 2.01 exes (you don't need to upgrade to gcc 2.8.x, just 
download the current files, they are compiled with 2.01).

SET 
------------------------------------ 0 --------------------------------
Visit my home page: http://set-soft.home.ml.org/
or
http://www.geocities.com/SiliconValley/Vista/6552/
Salvador Eduardo Tropea (SET). (Electronics Engineer)
Alternative e-mail: set-soft AT usa DOT net set AT computer DOT org
ICQ: 2951574
Address: Curapaligue 2124, Caseros, 3 de Febrero
Buenos Aires, (1678), ARGENTINA
TE: +(541) 759 0013