Newsgroups: comp.os.msdos.djgpp
From: frenchc AT cadvision DOT com (Calvin French)
Subject: Re: GCC 2.8.1, STL and hand-made functions
References: <19980607051814 DOT AAC17825 AT ppp124 DOT cartsys DOT com>
Date: Tue, 09 Jun 1998 09:38:57 GMT
NNTP-Posting-Host: ts52ip101.cadvision.com
Message-ID: <357d01b6.0@news.cadvision.com>
Organization: CADVision Development Corporation (http://www.cadvision.com/)
Lines: 16
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Precedence: bulk

>>libgpp.. Any ideas what I'm missing?

This was the other thing. You would be missing out big time IMHO if you did 
not pick up STL, unless you have a very slow computer or need to generate 
small code (speed is not an issue with STL, IMHO and also 
AccordingToMyPersonalExperience) Cheers again,

- Calvin -

---

http://www.cadvision.com/frenchc/                  (Wig out, peeps.)
B013CD10B7A08EC3B2C8B940018BC133C2AAE2F9FECA75F2B407CD21B80300CD10C3