Message-Id: <m0yhD9z-000S3xC@inti.gov.ar>
Comments: Authenticated sender is <salvador AT natacha DOT inti DOT gov DOT ar>
From: "Salvador Eduardo Tropea (SET)" <salvador AT inti DOT gov DOT ar>
Organization: INTI
To: santuary DOT master AT mailcity DOT com, djgpp AT delorie DOT com
Date: Wed, 3 Jun 1998 10:04:02 +0000
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT
Subject: Re: [help wanted] GCC hangs on my cyrix system.
In-reply-to: <3574df43.0@206.103.97.91>
Precedence: bulk

"Gil-Dong HOng" <santuary DOT master AT mailcity DOT com> wrote:

> this is my first try with djgpp, and then first time i tried to compile an
> example c file "hello.c" with a command "gcc hello.c -o hello.exe" under
> win95-osr2 us version with dos box, it did nothing but blinking a cursor. i
> waited about 5minutes; however it did nothing...i tried to run gcc under
> pure ms-dos mode by shutting down the system to restart on ms-dos mode....it
> showed some funny thing saying page fault error(i am not sure what was the
> message exactly) with lots of hex values....it seems to me that gcc doesn't
> like my cyrix cpu(6x86 pr200+) which is known for some incompatiblities with
> intel counter part......

I don't know if Robert still using the same machine, but he had a 6x86 PR166+ 
to develope RHIDE (and perhaps to port gcc 2.8.0/1). I still using a 5x86 120 
to develope, so I think Cyrix processors  works OK with djgpp.

SET
------------------------------------ 0 --------------------------------
Visit my home page: http://set-soft.home.ml.org/
or
http://www.geocities.com/SiliconValley/Vista/6552/
Salvador Eduardo Tropea (SET). (Electronics Engineer)
Alternative e-mail: set-soft AT usa DOT net set AT computer DOT org
ICQ: 2951574
Address: Curapaligue 2124, Caseros, 3 de Febrero
Buenos Aires, (1678), ARGENTINA
TE: +(541) 759 0013